This jack will have an icon of a headset above it. The plug with three black stripes should be plugged into the audio jack on the front of the SuperAmp. The headset’s main cable ends are not interchangeable. Make sure to set the headset up as shown below: To avoid echoing in the party chat, please do the following. Echoing (Other people in chat can hear themselves echoing).The mic will be unmuted, and you should be able to be heard. If you can see that red line, the mic is muted move the mic mute switch so that you cannot see that red line. The mic mute on the headset’s main cable will have a red line showing when the mic is muted.This jack will have the image of a mic just above it. The mic should be plugged into the mic jack on the headset itself.An easy way to check if your headset cable is plugged in all the way is to make sure that the headset and mic icons (located on the headset and mic boom, respectively) are lined up with each other. The cable is not fully inserted/plugged in until the plug slides into place the second time. It is a snug fit, and you should feel the plug slide into place twice. Make sure to fully insert the cable into the jack on the headset.Both of these jacks - on the SuperAmp and the headset itself - will have icons of a headset just above them. The plug with four black stripes should be plugged into the headset jack on the headset itself. The plug with three black stripes should be plugged into the Headset jack on the front of the SuperAmp. The headset’s main cable ends are not interchangeable.The headset would need to be plugged into the “Headset” jack in order to hear the game and chat audio. The jack with the word “Out” above it is the Stream Out jack. If the headset’s cable is plugged into the jack with the word “Out” above it (located on the back of the SuperAmp), the headset is plugged into the wrong jack. The headset’s main cable should be connected to the “Headset” jack in the front of the SuperAmp. ![]() Make sure the headset is set up as shown below. If you are having the above issues, please confirm the following to ensure that the headset is set up properly. If you are experience any of the above, it’s possible the headset is not set up correctly. Center (“Palm Tree”) logo is always red.If your headset is experiencing any of the following symptoms, please review the instructions below: Press and Hold Activate Voice Recognition (if available) Press and Hold When not in a Call Press Three Times Quickly and Hold Answer Call Connect to your headphones in your phone or Tablet Bluetooth settings.īLUETOOTH FUNCTIONS FUNCTION ACTION Play/Pause.Hold down Bluetooth Button until the LEDs begin to pulse Green.Please make sure to line up the magnets on the ear cushion with the magnets on the headset itself, as shown. The ear cushion is held there magnetically and should snap back into place with minimal effort. After you’ve adjusted the glasses-friendly channel to your liking, place the ear cushion back on the speaker. To increase the size/depth of the channel in the ear cushion, simply pull the tab and attach it to the post based on your preference.ģ. By default, the adjustment tab is set to the shallowest setting. Depending on the size of your glasses frame, use the tab adjustment to create the appropriate sized channel in the ear cushion. The ear cushion is held there magnetically and should come off with minimal effort.Ģ. Hold the ear cushion firmly and pull it away from the speaker. In order to adjust this, you must firmly remove the magnetic ear cushion. The ProSpecs Glasses Relief System creates a channel in the ear cushion to help reduce pressure on your glasses frame. Right-Click Elite SuperAmp PC and select Set As Default Communication Device.įor those who game with glasses, adjust the ProSpecs™ Glasses Friendly System for added comfort.ġ.Right-Click Elite SuperAmp PC and select Set As Default Device.Right-Click the Speaker icon in your Toolbar and select Playback Devices. ![]()
0 Comments
Leave a Reply. |